Light Pole Production Line
Processing
1. Steel Coil Decoiling, Flattening And Cutting To Steel Plate
2. Steel Plate Diagonally Shear To Trapezoidal Shape
3. Plate Bending On Press Brake To Pole Shape
4. Pole Gap Seaming And Welding
5. Pole Straightening
6. Flange Making And Installing
7. Lamp Door Cutting
8. Hot Dip Galvanized
Cut to Length for Pole
Hydraulic Press brake
Pole Seam Welding machine
Straingther
Portable Flame Cutting Machine
Pole Door Cutting
Cut to Length for Pole
It is for light pole material uncoiling, leveling, cutting to length , and taper slitting process, to get one side small width, one side big width steel plate.
Hydraulic Press brake
Pole Seam Welding machine
This Machine Composed By Main Machine Head , Tractive Body And Feeding Shelf. Tractive Body Was Moved By Collet In Small Vehicle Nipping The Steel Pole’s Collet. When The Small Vehicle Moved, Driven Steel Pole, From Small Collet To Big Collet, Regularity Moved. The Big Side Of The Steel Pole Was Hold By Feeding Vehicle, Force Automatic Sewing From Head Of Machine To Steerable Wheel. At One Time, The Welding Machine Starts Welding. This Machine Adopt Multiple Wire Submerged Arc Welding, Solder Was Reclaimed Automatic. Welding Line Was Symmetrical And Slinky. It Has Strong Filter, Forming One Time, And Be With High Welding Efficiency. The Speed Of Welding Achieve 2 To 3 Meters Per Minutes, Is About 3 Times Of The Gas Welding .The Cost Of The Welding Is Lower Than Gas Welding. It Is With Speedy Welding, High Efficiency, And Lowest Price In China Light Poles Industry Now.
Straingther
it is for straightening the street light pole after welding and Hot Dip Galvanizing process
Portable Flame Cutting Machine
For light pole base plate cutting and other parts cutting
Pole Door Cutting
It is suitable for conical pole, round pole, octagonal light pole door CNC cutting, The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw designed by computer.
The cutting source is automatic plasma. So the cutting speed will be much fast, and cutting edge quality is better then flame cutting. Due to the use of the U.S.-made Hypertherm plasma power supply and torch, the cutting gap is relatively small, and the cut pieces are generally used as door covers.
The pole material can be steel or Aluminum.
